Marine Exhaust Tube

Meets IMO (International Marine Organisation) Requirements

ARMATEC's standard marine exhaust tubing and WhispaPipe factory insulated marine exhaust tubing have been tested to and passed tests specified by "IMO Resolution A.753(18), Appendix 2". This test requires the water filled pipe to maintain its structural integrity for at least 30 minutes in the event of a fire. The testing institute was SP Fire Technology of Sweden ... Click for Certificate.

Marine Exhaust Tubing

A complete range of standard fibreglass marine exhaust tubing, bends, tees, flanges, and reducers fabricated in 100% corrosion resistant fibreglass. The main resin system used is ARMATEC’s C64 based on Hetron 197 that is an accepted marine survey material.

Other accessories such as silencers, mufflers, separators etc are available on request. ARMATEC specialises in fabricating these to your specific design and layout. This enables you to use the specifications from the engine manufacturers and designers, and then we make adjustments for the available space on your vessel.

WhispaPipe - Factory Insulated Marine Exhaust Tubing

An ARMATEC innovation to save you installation time is our marine exhaust tubing that comes fitted with acoustic insulation. This greatly reduces installation time in the limited spaces available where the pipework is run; the acoustic insulation is already done. The acoustic insulation is fitted without gaps ensuring better acoustic performance ... this is almost impossible to do if you fit the insulation in situ. The result is not only time savings, but better acoustic attenuation.

USES
• Engine exhaust tubing.
• Engine exhaust silencers and mufflers.
• Engine exhaust surge chambers.
• Engine exhaust intake tubing.
• Air ducting for air conditioning.
• Fittings such as bends, tees, flanges etc.