Ceilcote Range

Range of coatings and linings manufactured under licence in New Zealand to International Paints. Examples of some of the most popular of this produt range are given below:

Ceilcote® 100 Flakeline
Glass flake filled vinyl ester heavy duty lining applied to steel in two or more coats by trowel to a nominal thickness of 1.5 to 3.0 mm. Used in chemcial storage and process tanks.

Ceilcote® 242 Flakeline
Flake filled vinyl ester heavy duty coating applied to concrete and steel in two coats by spray or brush to a nominal thickness of 0.7 to 1.0 mm. Used in immersion and non-immersion duty. Widely used in chemical bunds and in corrosive fume areas. The most popular vinyl ester coating with barrier technology.

Ceilcote® 6400 Ceilcrete
Flake filled and glass reinforced vinyl ester heavy duty lining applied to concrete and steel by trowel to a nominal thickness of 3.0 mm. Used in immersion and non-immersion duty. Widely used in tanks, and chemical process areas. The finished surface is slip resistant surface is ideal.

Ceilcote® 505 Coroline
Flake filled and glass reinforced epoxy heavy duty lining applied to concrete and steel by trowel to a nominal thickness of 3.0 mm. Used in immersion and non-immersion duty. Widely used in tanks, and chemical process areas. The finished surface is slip resistant surface is ideal.

Back to COATINGS & LININGS Section Page

Back to HOME page for All Products

Ceilcote Coatings Bulletin

Ceilcote 251 Flakeline on base of petrochemical tank ... previous epoxy coating had allowed pitting of steel.

Ceilcote 242 Flakeline on dairy CIP effluent storage tank

Ceilcote 6400 Ceilcrete on brewery waste neutralisation tank.