Fibreglass can be a challenge to cost as it is a relatively unique composite. This article gives you a short overview on how to estimate pricing of fibreglass for your project.

An introduction to hangers and supports required when installing FRP duct. A reference table of maximum and recommended hanger/support spaces plus other information for engineers

What you need to know. Handling is easy due to the light weight of fibreglass. Avoid all point loads, and use nylon slings for lifting (not chains under any circumstances). Use lifting lugs provided.

Decades of world leading innovation. Armatec has been closely associated with "Ceilcote" for many decades and brought their technology to New Zealand companies.

Fibreglass Explained. Answers to frequently asked questions about fibreglass. What resins are reinforcements are used? Why use contact moulded products? What standards are applicable? What is the strength of fibreglass? And more...

Resin selection is determined by the chemical environment...

Applicability to Hydrogen Sulphide Removal - are Biological Scrubbers the right choice?

Armatec attend Water NZ conference 2014

Corrosion resistant and light weight fibreglass ducting is widely used for ducting corrosive gases at industrial sites and in corrosive atmospheres.

Fibreglass pipes are considered to be 'flexible' pipes. They are designed to deform or deflect diametrically within specified limits without structural damage. The degree of side support provided by the backfill used is a major determinant of the pipe stiffness required. 

Fibreglass laminates made by contact moulding, also called hand lay-up, have the highest resin to glass ratios of 70:30 when compared to alternative manufacturing methods.